Skip to content

5 Factors Affecting Battery Storage Capacity

Battery storage capacity is a critical specification for understanding how much energy a battery can store and for how long it can power a device or system before recharging. Here’s a detailed explanation of what battery storage capacity means and how it’s measured:


1. Capacity (Ampere-hour, Ah)

  • Ampere-hour (Ah): This is the most common measurement of battery storage capacity. It represents the amount of steady current a battery can supply over a period of one hour before it is completely discharged. For example, a battery rated at 10 Ah can supply 10 amps to a load for one hour, or 5 amps over two hours, and so on, under ideal conditions.

2. Watt-hour (Wh)

  • Watt-hour (Wh): Another important measure of battery storage capacity, especially for expressing the total energy a battery can store. It considers both voltage and current. Watt-hour is calculated by multiplying the battery voltage (in volts) by the battery capacity (in ampere-hours). For example, a 12 volt, 10 Ah battery has a capacity of 120 Wh.

Calculating Battery Storage Capacity

  • Formula: Capacity (Wh) = Voltage (V) × Capacity (Ah)

Factors Affecting Capacity

  1. Chemistry: Different types of batteries (like lithium-ion, lead-acid, nickel-metal hydride) have inherently different capacities and energy densities.

Lithium-ion (Li-ion)

  • Capacity: Generally provides a high capacity, allowing for longer usage between charges.
  • Energy Density: High energy density; among the best for rechargeable batteries, which is why they are prevalent in portable electronics, electric vehicles (EVs), and renewable energy systems.
  • Characteristics: Lightweight with a high power-to-weight ratio. Li-ion batteries also have a low self-discharge rate and no memory effect. However, they require integrated circuits for protection against overcharging and deep discharge.


  • Capacity: Relatively lower capacity compared to lithium-ion batteries. These batteries are available in various sizes and designs to suit different applications.
  • Energy Density: Lower energy density, making them bulkier than other types of the same capacity.
  • Characteristics: Lead-acid batteries are cost-effective, robust, and reliable, albeit heavier. They are widely used in automotive starter batteries, uninterruptible power supplies (UPS), and solar power storage but require maintenance in the case of flooded types.

Nickel-Metal Hydride (NiMH)

  • Capacity: Typically higher capacity than nickel-cadmium (NiCd) batteries but slightly less than some lithium-ion batteries.
  • Energy Density: Moderate energy density; better than NiCd but generally lower than Li-ion batteries.
  • Characteristics: NiMH batteries have a less pronounced memory effect than NiCd batteries and are more environmentally friendly (contain no cadmium). They are often used in hybrid vehicles, rechargeable household batteries (e.g., AA, AAA), and some older mobile phones and laptops. However, they suffer from a higher self-discharge rate than Li-ion and NiCd batteries.

Nickel-Cadmium (NiCd)

  • Capacity: Offers moderate capacity; lower than NiMH and most Li-ion types.
  • Energy Density: Has a lower energy density compared to Li-ion and NiMH batteries.
  • Characteristics: Known for their ability to deliver full power until discharge, durability, and excellent performance in cold temperatures. However, they suffer from a memory effect and environmental concerns due to cadmium’s toxicity. NiCd batteries are used in various industrial and professional-grade tools and portable devices.

Other Types

Lithium-Polymer (LiPo): Similar to Li-ion in terms of energy density and capacity but uses a polymer electrolyte and can be made thinner and lighter. Preferred in applications where form factor is critical.

  1. Temperature: Battery performance typically degrades in extremely cold or hot temperatures, affecting the actual capacity.

Cold Temperatures

  • Reduced Capacity: At cold temperatures, the chemical reactions in batteries slow down, leading to a reduction in available capacity. Users may notice that the battery depletes more quickly because less energy is released during discharge.
  1. Age and Health of the Battery: Over time, batteries lose their ability to hold charge, reducing their capacity.

Mechanisms of Aging

  • Chemical Degradation: Over time, chemical reactions within the battery can lead to the degradation of the electrodes and the electrolyte. For lithium-ion batteries, this might involve the growth of the solid electrolyte interphase (SEI) on the anode, which consumes lithium ions, reducing the battery’s capacity.
  • Physical Changes: Physical changes, such as the cracking and dissolution of electrode materials, can lead to a loss of contact between the electronic and ionic conductors within the battery, further reducing its effective capacity.
  1. Discharge Rate: The capacity can vary based on how quickly the battery is being discharged. Faster discharge rates can lead to a lower observed capacity (known as Peuket effect, particularly noticeable in lead-acid batteries).

Implications of Peukert’s Law

  • Lower Effective Capacity at Higher Discharges: As you draw more current from a battery, its internal resistance leads to more significant energy losses as heat. This means that under high-load conditions, a battery will seem to have a lower capacity because a portion of its stored energy is consumed internally.
  1. State of Charge and Depth of Discharge (DoD): Frequent cycles to a deep discharge state can affect the battery’s longevity and usable capacity.

State of Charge (SoC)

  • Definition: SoC is a measurement, expressed as a percentage, that indicates the current charge level of a battery relative to its capacity. An SoC of 100% means the battery is fully charged, while an SoC of 0% indicates the battery is fully discharged.
  • Importance: Monitoring SoC helps in understanding how much energy is available for use. It also plays a crucial role in battery management systems for preventing overcharging or deep discharging, both of which can reduce battery life.
battery storage

Depth of Discharge (DoD)

  • Definition: DoD indicates the fraction or percentage of the battery capacity that has been discharged relative to its overall capacity. A deeper discharge means a higher DoD percentage.
  • Impact on Battery Life: Batteries have a limited number of charge-discharge cycles they can undergo before their capacity starts to degrade noticeably. Frequently discharging a battery deeply (high DoD) accelerates the wear and reduces the total number of cycles it can undergo compared to shallower discharges (low DoD).

Measuring Battery Storage Capacity

To determine the actual capacity of a battery, a discharge test is often conducted where the battery is discharged at a constant current until it reaches its cut-off voltage, and the total Ah or Wh delivered is measured. This is often done using specialized equipment like battery testers or battery management systems that monitor cumulative energy in and out of the battery.

Detailed diagram of energy storage system

Practical Example

  • A smartphone battery might be rated at 3.85 volts and 4000 mAh, or approximately 15.4 Wh.
  • The rated voltage of the home energy storage system is 51.2V, the capacity is 200 Ah, about 10kWh, and a single charge can be used for daily household use for a day.
  • An electric vehicle might have a battery pack rated at 400 volts and 100 Ah, which results in a capacity of 40 kWh, capable of sustaining the vehicle for several hundred kilometers on a single charge.

Understanding battery storage capacity is essential for sizing systems for specific applications, estimating runtime, and managing expectations regarding battery performance. This is crucial not just for consumer electronics but also for larger applications like electric vehicles and stationary energy storage systems.

Leave a Reply

Your email address will not be published. Required fields are marked *