Skip to content


Contact Us

    You may like this

    Nominal Voltage51.2V
    Nominal Capacity100Ah
    Nominal Energy7.68kWh
    Warranty5 Years

    51.2 Volt 8kW 150Ah Wall Mounted Battery Energy Storage is a versatile, rechargeable battery system engineered for energy storage uses. These systems are commonly used alongside renewable energy systems like solar panels or wind turbines to store generated energy for use at a later time. They can offer backup power during outages or off-grid power in areas that lack traditional power infrastructure.

    Wall Mounted Battery

    Wall Mounted Battery Key Features

    • Voltage (V): The 51.2V represents the electrical potential difference, or voltage, that the battery can provide. This high voltage makes it suitable for household or light commercial uses.
    • Power Capacity (kW): With a 8kW capacity, this battery can deliver a substantial burst of electricity. This capacity can power a variety of household appliances or systems at once.
    • Energy Storage Capacity (Ah): A 150Ah storage capacity indicates how much energy the battery can store, which effectively tells you how long it can supply power before needing a recharge.
    • Wall-Mounted Design: The wall-mounted design allows for space-saving installation, which can be particularly beneficial in residential or small commercial environments where floor space is at a premium.

    Wall Mounted Battery Applications

    1. Residential Energy Storage: The battery can store surplus energy produced by rooftop solar panels during daytime for use at night or during peak demand periods.
    2. Backup Power: In case of power outages, the battery can function as an UPS (Uninterruptible Power Supply), ensuring critical appliances continue to operate.
    3. Off-grid Solutions: The battery can supply power in remote locations where connecting to a traditional power grid is impractical or costly.
    4. Load Shifting/Peak Shaving: By storing energy when demand (and electricity rates) are low and using it during high-demand periods, the battery can help lower electricity bills.


    • Installation Requirements: Make sure the installation is done professionally due to the high voltage and power capacity. Proper wall mounting is essential because of the battery’s weight.
    • Compatibility: Check if the battery’s specifications are in line with your existing power system, most importantly if you’re introducing it into a system with solar panels or an inverter.
    • Maintenance: Modern batteries are typically low-maintenance, but conducting routine checks can prolong their lifespan and ensure safety.
    • Warranty and Lifespan: Always check the warranty and expect the lifespan of the battery, in order to evaluate its cost-effectiveness over the long term.
    • Regulations and Incentives: Depending on your location, there may be government incentives for installing storage systems. Be aware of any regulations surrounding their installation and use.

    Wall Mounted Battery Specifications

    Battery dataNominal Voltage51.2V
    Nominal Capacity150Ah
    Charge Voltage57.6V
    Recommended Charge Current35A
    Max. Cont. Charge Current85A
    BMS16S 150A
    Charge High Temp Protection60°C
    Charge Low Temp Protection-5°C
    Discharge High Temp Protection65°C
    Discharge Low Temp Protection– 20°C
     Inverter DataRate Power8000VA/8000W
    Monitoring OptionWiFi
    Output Voltage220-230-240VAC
    Surge Power16000VA
    Peak Efficiency0.92
    Transfer Time10ms
    Inverter ParallelNone
    Wave FormPure Sine Wave
    Solar Charger
    & AC Charger
    Max.PV Array Open Circuit500VDC
    altx.PV Array Power11000W (5500Wx2)
    Operating Voltage MPPT Range125~425Vdc
    Max.Solar Charge current200A
    Max.AC Charge Current100A
    Frequency Range50Hz/60Hz (Auto sensing)
    Dimensions(L*W*H)L=953mm x W=600 x D=241
    Shell materialsheet metal
    Status IndicatorsSOC / ALM / RUN
    Communication in ParallelNone
    Communication PortsWIFI/RS485·CAN
    Terminal SizeM8